User manual

26: Terminal Server

_______________________________________________________________________________________________________

# TCP server mode

option server_mode 1

# Proxy mode (off by default)

option proxy_mode 0

# Local IP address to listen on (0.0.0.0=listen on any interface)

option local_ip '0.0.0.0'

# TCP listen port for server mode

option listen_port 999

# UDP mode

option udpMode 0

# UDP local port UDP mode

option udpLocalPort 0

# UDP port for UDP mode

option udpRemotePort 0

# If set to non zero, send empty UDP packets every this many

milliseconds to remote peer

option udpKaIntervalMs 0

# Max number of consecutive remote UDP keepalive missed (not received)

before UDP session considered broken

option udpKaCount 3

# Enable or disable TCP keep alives

option tcp_keepalive_enabled 1

# Interval in seconds between TCP keep alive probes

option tcp_keepalive_interval 5

# Time in seconds to wait for reponse to a TCP keep alive probe

option tcp_keepalive_timeout 2

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 187 of 255