User manual

26: Terminal Server

_______________________________________________________________________________________________________

# Forwarding timer mode (serial to network), 'idle'=timer re-started on

each received data, 'aging'=timer started on first rx

option fwd_timer_mode 'idle'

# Forwarding buffer size (serial to network)

option fwd_buffer_size 256

# Forwarding buffer size (network to serial), 0=use maximum possible

network rx buffer size

option sfwd_buffer_size 0

# Forwarding timeout in milliseconds (network to serial), 0=forward to

serial immediately

option sfwd_timeout 20

# Forwarding timer mode (network to serial), 'idle'=timer re-started on

each received data, 'aging'=timer started on first rx

option sfwd_timer_mode 'idle'

# serial device speed in baud

option speed 115200

# serial device word size (5,6,7,8)

option wsize 8

# serial device parity (0=none, 1=even, 2=odd)

option parity 0

# serial device number of stop bits (1 or 2)

option stops 1

# serial flow control mode (0=none, 1=RTS CTS, 2=XONXOFF)

option fc_mode 0

# time in milliseconds to start re-connecting after setting DTR low

option disc_time_ms 5000

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 186 of 255