User manual

5: Accessing the router
_______________________________________________________________________________________________________
5 Accessing the router
Access the router using either Ethernet or the 3G/4G interface.
5.1 Over Ethernet
The CLI can also be accessed over Ethernet, by default using Secure Shell (SSH)
and optionally over Telnet
To access CLI over Ethernet start an SSH client and connect to the router’s
management IP address, on port 22: 192.168.100.1/24. Then enter the
default username and password.
Username: Root
Password: Admin
Figure 4: SSH CLI logon screen
5.2 Over a 3G or 4G interface
You can also access the CLI over the router’s 3G or 4G interface using Secure
Shell (SSH) and optionally over Telnet.
To access CLI start an SSH client and connect to the router’s 3G or 4G IP
interface on port 22: 192.168.100.1/24. Then enter the default username and
password.
Username: Root
Password: Admin
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 18 of 255