User manual

25: Dynamic Multipoint Virtual Private Network (DMVPN)

_______________________________________________________________________________________________________

Configuration files are stored at:

/etc/config/dmvpn

To view the configuration file, use uci show dmvpn or uci export dmvpn

commands.

uci export dmvpn

package dmvpn

config general-settings 'common'

option enabled 'yes'

option ipsec_template_name 'DMVPN'

config interface

option holding_time '60'

option gre_interface 'GRE'

option gre_endpoint_ip '11.11.11.1'

option gre_endpoint_mask_length '29'

option nhs_ip '192.168.100.1'

option cisco_auth 'test'

uci show dmvpn

dmvpn.common=general-settings

dmvpn.common.enabled=yes

dmvpn.common.ipsec_template_name=DMVPN

dmvpn.@interface[0]=interface

dmvpn.@interface[0].holding_time=60

dmvpn.@interface[0].gre_interface=GRE

dmvpn.@interface[0].gre_endpoint_ip=11.11.11.1

dmvpn.@interface[0].gre_endpoint_mask_length=29

dmvpn.@interface[0].nhs_ip=192.168.100.1

dmvpn.@interface[0].cisco_auth=test

To change any of the above values, use uci set command.

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 176 of 255