User manual

25: Dynamic Multipoint Virtual Private Network (DMVPN)
_______________________________________________________________________________________________________
25.3.1 Configuring IPSec for DMVPN
This section explains how to configure VPN IPSec specifically for DMVPN. For
more information on general VPN IPSec configuration, read ‘Configuring IPSec’ in
the GW6600 User Manual.
Access the router’s web Interface by typing 192.168.100.1 into your browser.
Type in the username: root
Type in the password: admin. The Status page appears.
In the top menu click Services -> IPSec. The strongSwan IPSec VPN page
appears.
Figure 75: The strongSwan IPSec VPN page
Click the first Add button. The strongSwan status now shows an Enabled field
that is checked.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 166 of 255