User manual

3: GW1000 Series LED behaviour
_______________________________________________________________________________________________________
3 GW1000 Series LED behaviour
3.1 Main LED behaviour
There are five LEDs on the GW1000.
Figure 2: LEDs on the GW1000
3.2 Power and configuration LED
The power and configuration LED is either flashing or solid depending on the
router’s status.
The GW1000 Series takes approximately 2 minutes to boot up. During this time,
the power LED flashes.
Other LEDs display different diagnostic patterns during boot up.
Booting is complete when the power LED stops flashing and stays on steady.
LED Colour Status
Green flashing quickly Unit is booting from power on.
Green flashing slowly Unit is in recovery mode.
Green flashing quickly Unit is in factory config.
Green on Unit has completed booting up process and is in
either config 1 or config2
Table 6: Power/config LED colours and status descriptions
3.3 SIM LED
The SIM LED is either flashing or solid depending on which SIM is in use and its
status.
LED Colour Status
Green on Using SIM connected to network.
Green flashing Using SIM attempting to connect to network.
Table 7: SIM LED colours and status descriptions
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 15 of 255