User manual

21: Configuring SNMP
_______________________________________________________________________________________________________
config 'group' 'public_usm'
option group 'public'
option version 'usm'
option secname 'ro'
config 'group' 'private_v1'
option group 'private'
option version 'v1'
option secname 'rw'
config 'group' 'private_v2c'
option group 'private'
option version 'v2c'
option secname 'rw'
config 'group' 'private_usm'
option group 'private'
option version 'usm'
option secname 'rw'
The options defined for this section are outlined below.
Name Type Required Description
viewname string yes
Specifies an arbitrary view name. Typically it describes
what the view shows.
type string yes
Specifies whether the view lists oids that are included in the
view or lists oids to be excluded from the view (in which
case all other oids are visible apart from those ones listed).
Values: included, excluded
oid string yes
An oid:
1: is everything
.iso.org.dod.Internet.mgmt.mib-2: mib2
Any other valid oid
The following example defines two views, one for the entire system and another
for only mib2.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 145 of 255