User manual

18: Automatic operator selection
_______________________________________________________________________________________________________
Check the Interface Signal Sort checkbox, so auto created interfaces are sorted
in priority, based on signal strength value.
From the Roaming SIM dropdown menu, select the slot that the roaming SIM
card should be inserted in to.
Click the Firewall zone radio button to select the zone that the auto created
interface will belong to.
Type in the CHAP username and password.
Type in APN and PIN details.
From the Health Monitor Interval dropdown menu, select the interval that will be
used to monitor signal strength value.
From the Attempts Before WAN Failover dropdown menu, select the number of
fail attempts of Health Monitor checks that will cause the interface to be
disconnected.
From the Minimum ifup Interval dropdown menu, select the minimum interval
between two successive interface start attempts.
From the Interface Start Timeout dropdown menu, select the time for the
interface to start up.
From the Choose Signal Threshold dropdown menu, select the fail number point.
Name
Type
Required
Default
Description
Interface Signal
Sort
Boolean No 0 Sorts interfaces
by signal strength
so those having
better signal
strength at the
startup will be
tried first
Roaming SIM Dropdown menu 1 Specifies which
slot roaming SIM-
card is inserted.
Firewall Zone Radio button
menu
No None Adds all
generated
interfaces to this
zone.
Service Type Dropdown menu Yes UMTS/GPRS Specifies
technology type.
APN String Yes None Sets APN
settings.
PIN Number No None Sets SIM card
PIN number.
PAP/CHAP
username
String No None Sets username
used to connect
to APN.
PAP/CHAP
password
String No None Sets password
used to connect
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 116 of 255