User manual

18: Automatic operator selection
_______________________________________________________________________________________________________
Click Add. The Multi-WAN page appears.
Figure 55: The multi-WAN page
From the Health Monitor Interval dropdown menu, choose the interval that will
be used to monitor signal strength value.
From the Attempts Before WAN Failover dropdown menu, select the number of
fail attempts of Health Monitor checks that will cause the interface to be
disconnected.
In the Priority field, type in the priority number. The Multi-Wan interface priority
must be higher than one specified in package mobile ‘Setting options for
Automatically Created interfaces’ section below.
Ensure you have selected the Manage Interface State (Up/Down) option.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 112 of 255