User manual

18: Automatic operator selection
_______________________________________________________________________________________________________
interface was disconnected because ifup_retry_sec of Primary interface timed out
then go back to step 1 and repeat the process.
The primary predefined interface is defined in the network package. Ensure the
interface name matches the interface name defined in the multi-WAN package.
18.3.1.1 Creating primary predefined interface
On the web interface go to Network ->Interfaces. The Interfaces page
appears.
Figure 50: The interface overview page
Click Add new interface… The Create Interface page appears.
Figure 51: The create interface page
Type in the name of the interface in Name of the new interface field.
Type the Interface Name in following format: 3g_s<sim-number>_<short-
operator-name>. Where <sim-number> is number of roaming SIM (1 or 2)
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 109 of 255