User manual

17: Configuring Multi-WAN

_______________________________________________________________________________________________________

Figure 49: The multi-WAN traffic rules page

17.2 Multi-WAN UCI interface

Multi-WAN UCI configuration settings are stored in the following file:

/etc/config/multiwan

Run UCI export or show commands to see Multi-WAN UCI configuration settings.

A sample is shown below.

~# uci export multiwan

package multiwan

config multiwan 'config'

option preempt 'yes'

option alt_mode 'no'

option enabled 'yes'

config interface 'wan'

option disabled '0'

option health_interval '10'

option timeout '3'

option health_fail_retries '3'

option health_recovery_retries '5'

option priority '2'

option manage_state 'yes'

option exclusive_group '3g'

option ifup_retry_sec '36000'

option icmp_hosts 'disable'

option signal_threshold '-111'

option rscp_threshold '-90'

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 105 of 255