User manual

16: Configuring SMS
_______________________________________________________________________________________________________
Parameter Description
Name Name assigned to caller.
Number Number of caller allowed to SMS the router.
Enable Enables or disables caller.
Respond If checked, the router will return an SMS.
Table 13: Scripting commands and their descriptions
When you have made your changes, click Save & Apply and then reboot.
16.1 Monitoring SMS
You can monitor inbound SMS messages using the router’s web browser or via
an SSH session.
To monitor via SSH, login and enter logread –f&. An outgoing SMS message
appears.
Figure 44: Output from the command logread –f&
To monitor via the web browser, login and select Status >system log.
Scroll to the bottom of the log to view the SMS message.
Figure 45: Output from system log
16.2 Outgoing messages
You can send an outgoing message via the command line using the following
syntax.
sendsms 353872243909 ‘hello’
Figure 46: Output from the syntax sendsms 353872243909 ‘hello
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 101 of 255