User manual

2: GW1000 Series hardware
_______________________________________________________________________________________________________
2 GW1000 Series hardware
2.1 Hardware specification
2.1.1 GW1000 Series router model variants
GW1031-W: Single Ethernet, 3G, Dual SIM, Optional WiFi
GW1031-S
Single Ethernet, 3G, Dual SIM, Serial, Optional WiFi
GW1032-W: Dual Ethernet, 3G, Dual SIM, Optional WiFi
GW1041-W: Single Ethernet, 4G, Dual SIM, Optional WiFi
GW1042-W: Dual Ethernet, 4G, Dual SIM, Optional WiFi
2.2 Hardware features
• Dual SIM sockets
• Dual antenna SMA connectors for 3G/4G main and aux
• GPS antenna
• One or two 10/100 Mbps Ethernet ports
• Optional serial port
• WiFi with internal antennas on WiFi models
• Optional SIM cover
• Serial port
The asynchronous serial port is named ‘/dev/ttyUSB0’.
The serial port has a number of configurable settings, such as baud rate, word
size, parity, flow control mode, etc.
Figure 1: Serial port position on the GW1000
The serial port is configurable to operate in either RS232 or RS485 mode. The
default mode is RS232.
For more information on using the port in RS485 mode, read the Terminal
Server section of this manual.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 10 of 255