User guide

12
LED States
The MC760 Broadband2Go is designed with an LED status light
that indicates if the device has power and gives the current
connection status.
No Light No Power - Device off
Green Modem Solid
Modem has power but is not
transmitting or receiving
Slow Blinking Searching for CDMA network
Intermittent Blinking
Connected. Blinking rate relates
to data speed.
Red Service Solid No Service
Amber Error Solid Error, reset modem
Properly Insert the Modem
1. Remove the protective cap from the device.
2. Grip the device by its sides and gently insert it into the USB port.
The device should fit easily into the USB port.
Important: Do not force the device into the USB port as
this may damage both the device and the USB port.
If you have difficulty:
– Turn the device over and try again.
– Verify that you are using a USB port.
3. The hardware icon appears in the Windows notification area
(system tray).