User guide

11
Installation and Setup for Broadband2Go (MacOS 10.8)
This section will guide you through the installation and setup process for the Broadband2Go
software on Mac OS 10.8
Important: Do not insert the U600 Modem into your MacOS 10.8 laptop without downloading
the updated software from the Virgin Mobile USA website first.
1. Ensure you have an available Internet connection (Wi-Fi, LAN, etc)
2. Open a web browser and proceed to: http://www.virginmobileusa.com/phone-
manuals-guides
3. The software is posted under the U600 Product Page at the Software and Drivers
(Mac) link.
4. When prompted, select Save
5. Save the software file to your Desktop.
6. Once the download is complete, locate the file on the on the Desktop. Double-click
the compressed Zip file or unpack the Zip file to a folder.
7. Click Broadband2Go mpk installer for Mac to begin the installation process.
8. Proceed to step 5 on page 12 to follow the MacOS setup process.
Installation and Setup for Broadband2Go (Mac)
This section will guide you through the installation and setup process for the Broadband2Go
software on Mac OS 10.5, 10.6, 10.7.
1. Turn on your computer and close all applications.
2. Insert the Broadband2Go device into an available USB port.
3. You will be prompted by the Macintosh installer to begin the setup process.