User guide
3G Wireless N150 Mini Router m1-User Guide YMLM1WN
24 www.netcomm.com.au
Wireless
This page allows you to congure the wireless network features of the router.
Wireless settings allow you to set the wireless conguration items.
1. Transmit Power: The default is set to 100% for maximum range.
2. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Wireless Clients can roam freely over this product
and other Access Points that have the same Network ID. (The factory setting is “NetComm Wireless”)
3. SSID Broadcast: The router will broadcast the SSID so that wireless clients can nd the wireless network.
4. Channel: The wireless radio channel in use by your network.
5. Wireless Mode: Choose B/G Mixed, B only, G only, and N only, G/N Mixed or B/G/N mixed. The factory default setting is B/G/N
mixed.
6. Authentication mode: You may select from seven kinds of authentication to secure your wireless network: Open, Shared, Auto,
WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK.
a) WEP (Wired Equivalent Privacy). Enabling this security will protect your data while it is transferred from the computer to the
NetComm m1 router. Select the WEP Encryption (64bit or 128bit) and enter the WEP key in Key 1 eld. Please note that a WEP
Encryption key can only use numbers from 0 to 9 and letters from A to F. 64 bit encryption needs a 10 digit key and 128 bit
encryption needs a 26 digit key.