User guide

3G Wireless N150 Mini Router m1-User Guide YMLM1WN
20 www.netcomm.com.au
WAN Type- WiFi Hotspot:
This WAN type allows you to share one WiFi hotspot account with your friends or colleagues. Local clients connect to this router via a WiFi
connection, and surf the Internet by connecting to a remote WiFi hotspot. Follow the few steps below to connect to a remote WiFi hotSpot.
Note. If choosing WiFi HotSpot WAN type, the wireless channel of the Wireless network will be set to the same channel as used on the remote WiFi HotSpot.
Step 1:
Click “WiFi HotSpot Search” button to search for any available WiFi hotspots or WiFi APs (Access Points) nearby.
Step 2:
After searching, a list of the all available WiFi APs around you will be shown. Select the appropriate Wireless network and click the “Select”
button to start the connection or press “Refresh” button to search again.
Step 3:
If required, you can enter the Wireless security for the remote wireless network.
Click the “Save” button to save your selected settings.
Step 4:
Click the “Reboot” button to restart device so that the new settings take effect.