User guide

Settings 67
Settings
Section 5B
Configuring the LCD
⽧ Turning the LCD On or Off (page 67)
⽧ Setting the LCD Timeout (page 67)
⽧ Setting the LCD Brightness (page 67)
Turning the LCD On or Off
1. Log in to the home page.
2. Click Advanced Settings > Device > Display.
3. Set the LCD Backlight field to On or Off. (“Off” helps prolong the battery life, but you can’t
check the LCD for status icons and messages.)
Setting the LCD Timeout
To set the amount of time, after which the LCD of the device temporarily turns off:
1. Make sure you’re logged in to the home page.
2. Click Advanced Settings > Device > Display.
3. Make sure LCD Backlight is set to On.
4. In the Turn Backlight Off list, click a value. (A smaller value helps prolong the battery life.)
Setting the LCD Brightness
1. Make sure you’re logged in to the home page.
2. Click Advanced Settings > Device > Display.
3. Make sure LCD Backlight is set to On.
4. Select a value for On Battery/USB Power. (A lower brightness prolongs the battery life.)
5. Select a value for On AC Power.
Tip: Alternatively, you can permanently turn the LCD off, in which case it will never become lit and will not
display text and icons. (See
“Turning the LCD On or Off” on page 67.)
Note: The LCD turns on if an important system event occurs.