User manual

Simple WPS push-button method
Step 01
Press and hold the round WPS
button until it ashes
Step 02
Within 2 minutes, simply open your
Wireless Manager on your PC (typically
in the position shown by the red arrow)
or locate the WPS button on your
device to connect.
Note: If you can’t locate your wireless
manager, please follow the manual
process on the next few pages. If you
can’t nd the WPS function for your
device, please check the user manual.
10
Connecting
wirelessly to
your Super Hub
Installed by our technician?
Your computer should be connected to the internet. If you
need to add another computer or device, such as a tablet or
smartphone, you can connect by using the simple push-button
WPS method (shown across the page) or by following the
instructions that relate to your computer’s Operating System
e.g. Windows 7, on the following pages.
Note: If you can’t get online after following these guidelines,
we advise creating a wired connection as shown on page 22.
Once online please visit virginmedia.com/help for further help
on setting up a wireless connection.
Did you plug the Super Hub in yourself?
When you’ve connected everything yourself and called the
Virgin Media activation line, your Super Hub will be connected
to the internet and broadcasting a wireless signal. All you
need to do next is to connect your computer or device to that
signal. Note: It will take about 30 minutes after calling the
activation line for the connection to be live.
You can connect your computer or device by following the
simple push-button WPS method shown across the page or
by following the instructions that relate to your Operating
System e.g. Windows 7, on the following pages.
Connecting
Open
Wireless
Manager
Push
5.0
GHz
2.4
GHz
WPS
11
Virgin_Broadband_Brochure_reskin_AW_v2.indd 10-11 06/05/2014 15:24