Instruction Manual

6
Usage
Please follow instructions on Virgilant mobile app to pair your eTracker
sensor. Once an eTracker sensor is attached to an MDI and paired with
the Virgilant app, when you actuate your MDI you will automatically
engage the eTracker . A successful actuation of the eTracker is
indicated by a single flash of blue light at the front of the eTracker
device. When this happens, the eTracker sensor will record the date
and time of this dose.
Transferring to a new
inhaler
When you run out of medication in the inhaler that has an eTracker
sensor on, and you have a new inhaler, you can simply remove the
eTracker sensor by sliding the eTracker device off of the inhaler and
removing the medication canister. Remember to remove and transfer