User manual

6 — Configuring PPTP (Point-to-Point Tunnelling Protocol)
6-3
6.2.1 Creating Dial-Up Networking
i) From your Windows desktop, right-click on Network Neighborhood icon and
select Properties.
ii) Select Dial-Up Adapter#2 (VPN Support) and click Properties.
vi) You may be prompted for your Windows 98 CD-ROM. Place the CD-ROM
into your CD-ROM Drive and follow the instructions prompted.
vii) Restart your system when prompted.
You should see Microsoft
Virtual Private Networking
Adapter listed in the
components list as shown
on your left.
Click OK.
iii) Click the Advanced tab.
At the Property field, select
IP Packet Size. Go to Value
field and select Medium from
the drop-down list.
iv) Click OK. Restart your system.