Installation guide
BB005x Installation and Configuration Guide
Turn on the modem. In the HyperTerminal window, press the Enter key a
couple of times until you are prompted to enter the Login Name and the
Password. Please type the following for both the Login Name and the Password:
admin
The “Login Successful” message will appear followed by the BB005x prompt:
-->
You can begin to enter the CLI commands.
Changing the settings of your computer.
In order to configure the BB005x or to access the Internet through the modem
after the configuration is complete, the network card in the user’s computer
must be configured with the appropriate settings. Those settings are mainly
related to whether the IP address of the network card will be set to a
predetermined value or if it is going to be obtained automatically every time the
computer connects to the network. The steps that need to be taken also depend
upon the operating system running on the computer.
Systems running Windows 95/98/Me
Procedure A - Assigning a predetermined IP address value (to be referred below
as “known IP address”) to the network card in your computer.
1. In the Windows task bar, click on the Start button, highlight Settings
and click on Control Panel.
2. Double click the Network icon
3. Click on the network component TCP/IP for your Network Interface Card
(for example: Realtek RTL8139 PCI Fast Ethernet NIC) and then click on
the Properties button. If you have multiple TCP/IP listings, please make
sure that you select the listing associated with your NIC.
4. In the TCP/IP Properties dialog box, click on the IP Address tab and then
click on the option “Specify an IP Address” (make sure that the black
dot is beside this option).
5. Set the IP Address to the value indicated by “known IP address” and set
the Subnet Mask to 255.255.255.0
6. Click on the Gateway tab and then remove any installed Gateway.
7. Click on the DNS Configuration tab and then click on the option
“Disable DNS” (make sure that the black dot is beside this option). Do
not change any other settings.
8. Click on the OK button twice to confirm and save your changes.
9. Click on the Yes button to restart your computer.
9