Installation guide

BB005x Installation and Configuration Guide
BB0055 Back Panel
A diagram for the back panel of the BB0050 router/modem together with the
functionality of the connectors and switches are shown in the figure and table
below.
Switch/Connector Functionality
ON/OFF Switches the unit on and off
Power Connects the device to an electrical
outlet using the power adapter
Console RS-232C interface that is used for
Command Line Interface
configuration (not required)
Uplink Connects the device to a standard
port on another Ethernet
hub/switch using an RJ-45
straight-through Ethernet cable
L1,L2,L3,L4 Connects the device to your PC’s
Ethernet port using an RJ-45
straight-through Ethernet cable
DSL Connects the device to a telephone
j
ack using an RJ-11 telephone
cable
Configuration Methods
The BB005x can be configured and administered through the Web interface or
through the Command Line Interface (CLI).
Web Interface
The recommended and most efficient way to configure the BB005x
modem/router is by using a Web Browser to access the Web interface. Most
features and operation modes can be enabled through this interface. Chapter 3
of the manual contains step-by-step instructions on how to configure the
BB005x for some of the most popular ADSL configurations modes while using
the Web interface
7