Installation guide
BB005x Installation and Configuration Guide
IP address Type in the public IP address that can be used by
NAT.
Subnet Mask/IP
Address 2
Type in subnet mask if Use Subnet Mask is
selected. Type in the last IP address if Use IP
Address Range is selected.
4. After configuring the table, click on Add global address pool.
To delete global address pool, click on the Delete hyperlink and then click on
Delete Global Address Pool.
Configuring NAT Reserved Mapping
Reserved mapping allows the user to direct packets from an external security
interface or a public IP address to a particular private IP address on the local
network. In order to configure reserved mapping, NAT must be configured first.
1. Click on Advanced NAT Configuration from the NAT security interface
table.
2. Click on Add Reserved Mapping. The following screen appears:
47