Installation guide

BB005x Installation and Configuration Guide
2. Make sure that security is enabled. If not, please check the button beside
Enabled.
3. Click on Add Interface from the Security Interfaces section to display
the Add Interface page.
4. Click on the Name drop down list and select the LAN service that you
want to base the security interface on.
5. Click on the Interface Type drop down list to specify the type of
interface added: external, internal or DMZ.
6. Click on Apply. The Security page appears. This page has a table that
includes information about each security interface that you created.
To delete the security interface: ►
1. Click on Delete Interface to display Security: Delete Interface page.
2. Check details and click on Delete.
Configuring NAT
NAT (Network Address Translation) is essentially a mechanism that will
multiplex a multitude of private IP addresses onto a single public IP address.
This allows a number of computer hosts to share a public IP address on the
Internet.
44