Installation guide

BB005x Installation and Configuration Guide
The page that opens page allows you to add the IP address of a DNS server to
the DNS relay’s list of server IP addresses.
3. Type the IP address in the DNS server IP address text box
4. Click on Apply
A page appears with the following message:
The DNS relay is enabled. Relaying to:
192.168.100.10
IP Routes
This option allows you to create static IP routes to destination addresses via an
IP interface name or a Gateway address
Click on IP routes from the Configuration menu
The page that opens displays:
- Destination IP address
- Gateway address
- Netmask address
To edit the destination, gateway and netmask address of a route: ►
►
►
Click the relevant textbox, update the information and click on Apply
To edit the cost and interface setting of the route:
Click on Advanced Options for the specific route and update the relevant
information. Click on OK.
To create a new route:
1. Click on Create new IP V4 route
2. Complete the Create IP V4 Route form to configure the route.
3. Click OK.
The Edit Routes page appears and displays the details of the route you have
just configured.
41