Installation guide

BB005x Installation and Configuration Guide
Chapter 5: Advanced Features
ADSL mode
The BB005x allows users to configure the modem for the appropriate ADSL
standard used in their network: Multimode, T.413 ANSI, G.992.2 dmt or
G.992.2 Lite.
► To configure the ADSL mode:
1. Click on Advanced Configuration
2. Click on ADSL mode from the Advanced Configuration menu
3. Select from one of four ADSL modes on this page: multi, ansi, glite and
gdmt. If no special setting is required, select the mode provided by your
ISP.
DHCP Server/Relay Agent
The BB005x can be configured to act as a DHCP client, server or agent.
As a DHCP client the BB005x obtains its IP address from the DHCP server that
is normally located at the ISP site.
As a DHCP server, the BB005x, assigns IP addresses to computer hosts located
behind the modem router in a NAT arrangement
As a DHCP relay, the BB005x passes through messages to and from the
computer hosts behind the router that are obtaining IP addresses from the
DHCP server at the ISP location
To configure the DHCP server: ►
1. Click on Advanced Configuration
2. Click on DHCP Server/Relay Agent from the Advanced Configuration
menu
3. The DHCP Server page appears. The values displayed are the default
settings for the DHCP server.
4. Click on Configure to change the DHCP server configuration. Parameters
that can be reconfigured on this page:
- DHCP address range
- Global default and maximum lease times
- Primary and secondary DNS server addresses
39