User manual

ELECTRI6ITY
29
Here’s an example of how the ‘Control articulation morphing by CC if an
AMT-Articulation is selected’ mode can be used with expression pedal
(which traditionally sends CC#11) functioning as the controller: All morph
articulations with an [AMT] tag can be easily morphed with your Expression
Pedal in this mode. Simply assign CC#11 Expression to the AMT Morph
parameter > [see ‘Performance Page | Changing CC assignments’] and
switch to ‘Control articulation morphing by CC if an AMT-Articulation is
selected’ > [see ‘Performance Page | Changing Play Mode]
ARTICULATION VOLUME
CONTROLLED
BY
MORPHING
CONTROLLED
BY
VIBRATO
CONTROLLED
BY
Sustain (B-1) MIDI Velocity n/a Mod wheel
Half-Muted (B-1) MIDI Velocity n/a Mod wheel
Muted<->Sustain
[AMT] (C0)
MIDI Velocity Expression Mod wheel
Muted<->Half-Muted
[AMT] (C0)
MIDI Velocity Expression Mod wheel
Sustain<->Harmonics
Octave [AMT] (D0)
MIDI Velocity Expression Mod wheel
Sustain<->Harmonics
Fifth [AMT] (D0)
MIDI Velocity Expression Mod wheel
Muted Hammer On<-
>Hammer On [AMT]
(E0)
MIDI Velocity Expression Mod wheel
Muted Pull O<-
>Pull O [AMT] (E0)
MIDI Velocity Expression Mod wheel
Harmonics (D#5) MIDI Velocity n/a Mod wheel
Ghosts Clean (G0) MIDI Velocity n/a Mod wheel
Ghosts Dirty (G0) MIDI Velocity n/a Mod wheel
Slides (A0) MIDI Velocity n/a Mod wheel
FX (F0) MIDI Velocity n/a Mod wheel