User Manual

General Information

2.1 Dimensions and Layout

Operating Parameters D4/D4-V

No-tools maintenance Yes

Special lamp plug Yes

Lamp operation indicator Yes

Controller operation indicator Yes

Reference card Yes

Lamp timer display Yes

Lamp timer reset button Yes

Mute button Yes

Figure 3 System - Dimension and Layouts

Item Description Function

1 Sample valve Allows for sampling of raw water.

2 Shut-off valve Required to allow maintenance of pre-treatment equipment.

3 Pre-treatment

Refer to Section 1.3.

Note: A 5 micron (nominal) sediment filter must be installed before the UV system and after any water

softening equipment.

4 Bypass shut-off valve

Bypass line and valve are optional. Intended to provide emergency water supply in the event that the

UV system is unavailable.

5 Shut-off valve Required to allow maintenance of UV system.

6 Sample valve

Allows for sampling of water entering UV chamber; necessary in order to confirm water being treated

is of adequate quality.

7 UV chamber Provides disinfection of the water.

8 CoolTouch

™

valve Drains water from the chamber that’s been warmed by the lamp during periods of no flow.

Clearance for

lamp removal

To Drain

48”

(

122cm

)

OUTLET

A B

1 2

INLET