- ViPowER, Inc. VP-8220 SmartDup Installation Manual

SmartDup VP-8220 Operation Manu
SmartDup VP-8220 Package Including:
1. Duplicator Converter.
2. CD-ROM Box (VP-6020) x 2
3. AC/DC Power Adaptor (Universal Type +90 ~ +250VAC)
1. One to one Stand-Alone IDE CD Duplicator.
2. Auto duplication & Easy operation without any push bottom.
3. Fastest CD Duplicator up to 24x speed (ViPowER is the only factory that
manufactures it today!)
4. Auto Detects CD-R or CD-RW media's acceptable maximum writing speed and
minimum writing time.
5. Upgrade through Internet, or upgrade via CD-ROM.
6. High Performance with Low cost & easy installation. No additional H/W or S/W
required.
7. External Power supply.
8. Supports Buffer Under Run.
9. Capable of connecting to your Desktop/ Notebook via Fire Wire/ USB/ PCMCIA/
Card Bus cable. (See option Desktop Interface)
10. Support Formats: Audio CD (CD-DA), CD-ROM, CD-XA (Photo & Video CD),
CD-Digital, CD-Bridge, CD-Extra, Video CD & CD-Text.
11. Automatically detects/ Erases/ Re-writes/ Copies.
12. Compatible with most well known CD-RW & CD-ROM Devices.
13. User friendly with LED display function.
14. Buzzer to alert user.
1. Install CDR-W Writer & CD-ROM Driver in each CD-ROM box. Must put rubber
stand on each CD-ROM box.
2. CD-ROM Driver on top & CDR or CDR-W Writer on the bottom.
3. Plug in Duplicator Converter in both CD-ROM box connectors.
4. Plug in Power Cable in Duplicator Converter.
5. Plug in Power Cord to AC Power source (+90 ~ +250VAC).
6. on top of Duplicator Converter.
7. on Top of Right hand side. To adjust duplicator function.
8. on Right hand side, power switch. Normally in position
Features:
Install Steps:
LED Display
Dip Switch
Rock Switch ON
7: Auto Mode
(Erase & Copy)
6: Copy Only
5: Test Only4: Test & Copy
3: Erase Only
2: 1x Copy
(Minimum)
1: Upgrade
Firmware
0: Reserved
High Speed
(Maximum)
Low Speed
(4x)
Function Setting
SmartDup VP-8220 Operation Manu 1