Owner's Guide

8
© 2013 Directed. All rights reserved.
Advanced Commands: (Level 1)
Press and release the button one time first, before pressing one of
the following command buttons. The transmit LED illuminates in sets of
single flashes to indicate Level 1.
Silent Lock
Press and release
The doors lock (if connected), without horn honks.*
Silent Unlock
Press and release
Doors unlock (if connected), without horn honks.*
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting.
Note
Remote Start must be On to use this feature.
AUX 1
Press and release AUX
Activates (or if On, deactivates) the Aux 1 output.
* The optional Horn Honk feature must be connected.