Installation guide

© 2000 Directed Electronics, Inc. Vista, CA 3
what is included
■ The control module (see diagram)
■ Two four-button remote transmitters
■ A plug-in status LED
■ A Valet
®
/program switch
■ A Stinger
®
shock sensor on-board the control module
■ A Revenger
®
siren with rechargeable back-up battery
■ A 15-amp alarm fuse
■ A 10-amp light flash fuse
■ An antenna (p/n 542H)
■ Two siren keys
H1 16-Pin
Harness Port
H2 10-Pin
Harness Port
H3 6-Pin
Harness Port
2-Pin Plug-In
LED Port
3-Pin Program/
Data Port
Shock Sensor
Adjustment
Plug Lock Cover
Antenna