Owner's Manual

© 2013 Directed. All rights reserved.2
Door sensor is paired with your system.
5. After the sensor is paired, you can give it a
unique name (i.e. “Front Door”)
In this screen, if you click the “More” button,
you can set up additional options for the de-
vice, such as “arm stay”, or “custom arm”, as
well as select what action the sensor performs
when triggered.
6. Once completed, click the “Finish” button.
The sensor is now ready for mounting.
Mounting instructions:
1. Mount the larger part of the sensor (Magnetic
Detector) on the frame side of the door or
window that the sensor is to be used with.
2. Mount the smaller part of the sensor (the Mag-
net) on the door or window surface opposite
the Magnetic Detector.
3. Makes sure the align-
ment marks (small
dots) on the sensor are
facing each other. The
two parts of the sensor
should not be more
than ¾” apart.
4. The sensor should be
mounted high and out
of reach on either the door or window being
used.
Door or
Window
Align
dots
Door Frame or
Window Frame