Instruction manual

Advanced Remote Control Commands

Refer to the Quick Reference Guide for more information

on advanced remote start commands that are speciﬁc to

each vehicle.

Fault Condition Alerts

If, when performing a command, a condition exists that does not al-

low activation of a Remote Start feature*, the

LED and a fault tone

plays to alert of the fault condition**.

* Remote Start feature not available when the Remote Start status is

incorrect upon receiving the command. (Example: Runtime reset

command received when remote start is off).

Refer to the notes included in the command descriptions that ad-

dress these faults or go to Remote Start Faults under the Remote

Start Features section for more details.

** Conﬁrmation

LED and tone are only applicable to the Re-

sponder LE 2-way remote control.

Basic Commands

Lock

Press and release

The doors lock (if connected) and parking lights ﬂash once. The Lock

LED and beeps play to conﬁrm

Unlock

Press and release

The doors unlock (if connected) and parking lights ﬂash twice. The

Unlock LED and beeps play to conﬁrm