The company behind Viper® Auto Security Systems is Directed. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security and accessories available. The recipient of nearly ® 100 patents and Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and serviced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services.
Table of Contents Congratulations............................................................................1 Standard Remote Configuration......................................................2 2-Button Transmitter.......................................................................2 Remote Learning...................................................................2 Arming................................................................................3 Disarming.........................................
Congratulations Congratulations on the purchase of your state-of-the-art Power Sports Alarm System. Reading this Installer and Owner’s Guide prior to using your system will help maximize the use of its many features. For more information please visit us online (see back cover for URL). For any additional questions please contact your authorized Directed dealer or Directed at 1-800-753-0600. Additional support is also available at: http://support.directed.com.
Standard Remote Configuration Function Button Action Arm Press and release Disarm Press and release Press and hold (any system state) Panic AU AU XX Aux Output Press and release (any system state) + Press and release within 5 seconds of arming system Tilt bypass AUX All Sensor Bypass AUX AUX Press and release 2 times within 5 seconds of arming system Press and hold (ignition on & system disarmed) Anti-Jacking (On & Off) AUX Valet mode Cycle ignition on & off twice, then press and release
3. 4. to the system will chirp once, the second two times, and so on, until a total of 4 remotes are learned to the system. Up to 4 remotes can be learned to the system. If you want to learn a 5th remote, the 1st remote will be cleared from the system, and when you learn a 6th remote, the 2nd remote will be cleared, and so on. To exit learn mode – The system will exit learn mode automatically after 8 seconds or you can manually exit learn mode by turning the ignition OFF.
Tilt/Shock Sensor Trigger 1. 2. Sensitivity for Tilt/Shock sensors are adjustable, see FUNCTION SELECT MENU 1&2. If the motorcycle is tilted/moved: • If the system is in Sleep mode: At first, the siren will chirp and parking lights will flash 10 times, then the siren will sound continuously for 30 seconds with parking light flashes. • If the system is in Wake mode: The siren and parking lights will trigger continuously for 30 seconds. Note: Any alarm zone can be triggered up to 8 times per arming cycle.
times to indicate the last zone that was triggered when the system was armed. Table of Zones Parking Light Flash System Triggered Zone 4 times Tilt/Shock sensor triggered 5 times Instant triggered 6 times Loop wire triggered 7 times Ignition triggered Aux Press and release and . An optional auxiliary function, such as lighting or radio turn on, can be controlled by pressing these buttons. By default, the aux channel sends a 1-second pulse on the aux wire.
second, and the parking lights will flash for 10 seconds. Press to stop panic. Anti Motorcycle-Jacking 1. AUX With the ignition ON, press and hold for 2 seconds. The LED will flash quickly indicating that motorcycle-jacking mode is activated. The siren will chirp once every 3 seconds. After chirping 5 times, the siren will chirp once every 1.5 second. After chirping 8 times, the siren will sound continuously; the parking lights will continuously flash and the engine will be disabled.
Pin Number Setting Factory Preset Pin Number: 1 (Led Blinks One Time) In disarming mode, turn ignition ON/OFF 8 times within 15 second, and end in ON position on the eighth time. The LED will stay solid for 2 seconds, then the system enters into PIN setting mode: 1. Confirm the original (preset) PIN Number Turn the ignition OFF within 10 second, LED will start blinking slowly to confirm the preset PIN Number.
Enter Valet Mode Turn the ignition ON and then OFF 2 times, and press and hold and within 5 seconds. The siren will chirp once, and the system will enter valet mode. In valet mode, the LED will stay on solid for 1 hour, and then will shut off to reduce current draw. In valet mode if you press the button, the siren will chirp 3 times. Once the 1-hour solid LED cycle ends, the LED will also flash 3 times when the button is pressed. AUX AUX Note: Use the same method to exit valet mode.
3. 4. 5. After unit has entered the proper feature number you want to change, press the button toggle through the options. The siren chirps according to its current setting. Turn the ignition OFF to exit feature settings. The siren will emit one long chirp. Inside the menu setting, if without any operation within 10 seconds, the siren will emit one long chirp and exit feature settings. AUX © 2017 Directed. All rights reserved.
10 © 2017 Directed. All rights reserved. Siren (+) / Horn (-) output Flash lamp arm/disarm Shock Sensitivity Aux Output Reset all to Default 5 6 7 8 9 Momentary Output LEVEL 3 ON Positive ON Momentary Output 1 ON Positive Silent mode Silent/chirp mode 4 Chirp mode Tilt SENSOR sensitivity 3 OFF 1(°) OFF ANTI MOTORCYCLE-JACKING 2 1 ON 5(°) OFF AUTO REARMING 1 Default Setting Feature Name No.
Power Saving (Sleep) Mode • • • After 24 hours in the armed status, the LED will flash at a slower rate at once every 4 seconds, and after 48 hours, it will flash once every 8 seconds. After 96 hours of no activity (arm or alarm trigger) the alarm enters sleep mode. The alarm receiver and LED turn off to save as much battery power as possible. The system is drawing next to no current in this mode. Cycling the ignition will wake the unit up.
System Maintenance This system needs no specific maintenance beyond remote control battery replacement. The remote is powered by one 3V CR2032 battery. Battery Replacement 1. 2. 3. Using a small slotted (flat-head) screwdriver, insert into the slot located along the edge of the remote control and carefully pry the unit open. Turn unit over and carefully remove rear housing. Remove the battery from holder and replace with a new one. Reassemble all parts and snap together.
Installation Guide Blue (-) Trigger Input Fuse 15A White 18AWG Lamp Out White/Brown Lamp In Fuse 15A Red (+) LED Black (-) LED Red 22AWG (+) 12V Violet/White #22 Loop In Black 22AWG (-) Ground Violet/White #22 Loop Out Black/White 22AWG Ant Red/White (-) AUX Output Brown 22AWG Siren Green 18AWG Cut NC Yellow 22AWG (+) Ignition 12V Battery Green 18AWG Cut COM © 2017 Directed. All rights reserved.
Blue (-) Trigger Input This input wire can be used as an instant trigger input for use with optional single zone sensors. Violet/White Closed Loop This wire can be used to protect a part of the vehicle where a trigger is desired when the wires of the connection are not in contact, rather than in contact. This closed loop connection is useful for protecting parts like saddlebags, luggage carriers, etc. that could be easily removed from the vehicle. Connect this wire through the object being protected.
White Parking Light This wire should be connected to the parking lights wire in the vehicle. It activates when the system is armed/disarmed, and when the alarm is triggered, It can be set for a (-) or (+) output. See the White/Brown parking light input wire for setting light flash polarity.
Black/White Antenna This wire is the antenna for the control module to receive commands from the transmitter. Do NOT cut this wire. Note: The antenna wire should not be bundled with the other harness wires as this will reduce the effective range of the transmitter. Keep the antenna wire as straight and horizontal as possible. Also, keep the antenna wire as far away as possible from metal.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device.
Limited Lifetime Consumer Warranty Directed Electronics.
ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT.
This warranty is only valid for sale of product(s) within the United States of America and in Canada. Product(s) sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. For further details relating to warranty information of Directed products, please visit the support section of Directed’s website at: www.directed.com. This product may be covered by a Guaranteed Protection Plan (“GPP”).
