Installation guide

To access another feature:

You can advance from feature to feature by pressing and releasing the Valet

/Program switch the number of times

necessary to get from the feature you just programmed to the feature you wish to access. For example, if you just

programmed Feature 1 and you want to program Feature 2:

1. Release the Valet

/Program switch.

2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.

3. Press the Valet

/Program switch once more and HOLD it.

4. The siren will chirp two times to confirm that you have accessed Feature 2.

To exit the Code Learning, do one of the following:

■ Close the open door.

■ Turn the ignition on.

■ No activity for longer than 15 seconds.

■ Press the Valet®/Program switch too many times.

features menu

FEATURE DEFAULT LED ON SETTINGS LED OFF SETTINGS

NUMBER (PRESS TRANSMITTER BUTTON I) (PRESS TRANSMITTER BUTTON II)

1 Active Arming Passive Arming

2 Confirmation Chirps ON Confirmation Chirps OFF

3 Ignition-Controlled Ignition-controlled

Door Lock/Unlock ON Door Lock/Unlock OFF

4 Active Locking Passive Locking

5 0.8-second Door Lock Pulse Duration 3.5-second Door Lock Pulse Duration

6 Double Pulse Unlock OFF Double Pulse Unlock ON

7 Code Hopping Technology ON Code HoppingTechnology OFF

NOTE: Factory defaults are indicated in bold type.