Specifications

Viper Installation and Operators Manual 2.08
88


 Auto Point Entry: This method allows Viper to draw the boundary in real-
time as you drive through the field. When the boom comes within one boom
width of the boundary starting point, Viper automatically closes the bound-
ary. You can also choose to close the boundary manually. If so, Viper
draws a straight line from the position where you manually close the
boundary to the boundary starting point.


 Manual Point Entry - Rubber Banded Zone: This method allows you to
drop boundary points as you are driving the boundary. When you close the
boundary, Viper automatically connects the points to draw the boundary.
How to Mark a Field Boundary
1. Press the Scout tab.
2. Select Record, then Zone. The Record Field Feature screen displays.
3. Select Field Boundary.
4. Select the method you want to use to record the boundary.
5. Select an offset shift for the boundary that is in relationship to one-half the
boom width.
6. Press OK. Viper draws the boundary line on the Scout map.