Specifications

Manual # 016-0159-894 Rev H 01/07
77
3-Navigating the Viper Interface
Display Data
Remember: The Display Data button does not show up if
you are not using a CAN controller.
Information for Field Volume, Field Area, Tank Volume, Total Volume, and Tank
Area are displayed when this button is pressed.
When the ‘Display Data’ button is pressed, Field Volume, Field Area, Tank Volume,
Total Volume, and Total Area and Area/Hr are displayed in the lower portion of the
Map Area. You must press the data area once to display the Total Volume, Total
Area and Area/Hr, and again to toggle back and forth. Press the ‘Display Data’
button to hide the information.