Specifications

Manual # 016-0159-894 Rev H 01/07
67
3-Navigating the Viper Interface
Speed
The current speed of the vehicle displays in the upper right-hand corner of the
screen.
If this section also displays the word “CAN”, then the Viper is connected to a Raven
CAN bus control system. CAN speed is the speed reported by the CAN control
system for product application.
If this section displays the word “GPS”, then Viper is connected to an external
Raven console. The reported speed is the GPS speed as determined by a DGPS
receiver, such as an Invicta or Phoenix receiver.
Important: When connected to an external Raven console,
the GPS speed displayed on Viper is for reference purposes
only. It may not be the same speed being used by the Raven
console for product application. You must make sure that the
speed on the external controller is accurate. See Appendix D
for more detail.