Specifications

Manual # 016-0159-894 Rev H 01/07
61
2-Setting Up the Controller Area
Alarms
Viper displays various alarms depending upon the conditions programmed into the con-
sole. Specific warning boxes display when the conditions for the alarm are met. In
addition to the warning boxes, the Product Control area of the main screen displays a
‘Warning’ symbol instead of the ‘Thumbs Up’ symbol.
Important: Off Rate and Low Limit alarms will automatically clear
once the condition has corrected itself. All other alarms will need to
be cleared by pressing the clear alarms button.
Once you have corrected the condition that caused the alarm, the ‘Thumbs Up’ symbol
displays. To see the current alarms for the system, press the ‘Current Alarms’ button.
The Current CAN Node Alarms screen displays:
To clear all the current alarms, press the Clear Alarms button.
Important: Pressing the Clear Alarms button will clear the
current system alarms, but the alarm condition may still be
present and may need to be corrected.