Specifications

Viper Installation and Operators Manual 2.08
60
5. To reset the odometer miles and feet data, press Reset. The data in the fields
are reset to zero.
6. Press Next. The Node 1 screen displays.
7. To set data, enter the data in the fields using the screen keyboard and press
Set. Or, to reset the data in the fields, press Reset.
8. Repeat steps 6 thru 7 for each node.
9. Press OK. Viper saves the information.
NOTE: Field Volume, Field Area, and Tank Volume can be reset
while in a job. Total Volume and Total Area can only be reset outside
a job.