Specifications

Manual # 016-0159-894 Rev H 01/07
59
2-Setting Up the Controller Area
This screen also displays the distance traveled by the vehicle as calculated by the CAN
bus or GPS unit speed data. You can reset this value to zero.
Resetting the Tally Registers
Each tally has its own reset button. If you press the reset button for a tally, it resets the
tally for every node. For example, if you have three product nodes in the system and
you press the reset button above the field volume tally, all three nodes reset to zero. You
can also reset the nodes individually. This is helpful when applying product to different
fields with different nodes. Pressing reset above the Tank Volume column will reset all
product tank volumes back to the initial entered volume.
Setting or Resetting Distance and Individual Nodes
1. From the Tally Registers screen, press Next. The Odometer screen displays.
2. Using the screen keyboard, enter the miles you want to set in the Miles field.
3. Using the screen keyboard, enter the feet you want to set in the Feet field.
4. Press Set.