Specifications

Viper Installation and Operators Manual 2.08
54
Pressure Area
The Pressure Area displays the dual pressure readouts for two different systems.
Dual Pressure
The Viper CAN system has two pressures that can be monitored on the Viper system,
if so equipped. They are monitored on the system as P1 and P2.
P1=Pressure Transducer 1.
P2=Pressure Transducer 2.
Viper displays:
 All dashes if the node does not detect a pressure transducer.
 CAL if it detects a pressure transducer but the transducer is not
calibrated.
Remember: Pressure readings are provided as display only
and do not affect product control.