Specifications

Viper Installation and Operators Manual 2.08

3. Adjust the PWM setting for the minimum setting.

a. Press the up arrow button until pressure is observed on the pressure

indicator in a liquid application or the belt just begins to move in a

granular application.

b. Press the down arrow button until the pressure drops to the minimum

desired pressure in a liquid application or the belt just stops in a

granular application.

Helpful Hint: You can increase or decrease the step sizes for the up

arrow and down arrow buttons by either selecting 1 or 10 for the step

size.

4. Press the Set Min PW to enter the minimum PW setting.

Note: The minimum PWM setting will be reduced by 10.