Specifications

Viper Installation and Operators Manual 2.08
40
Flow/Shaft Alarm
You can enable or disable the Flow/Shaft alarm to help control a chemical injection.
Disable this alarm when you are not controlling a chemical injection.
Vacuum/Bin Alarm
You can enable or disable the Vacuum alarm when connected to a chemical injection
pump. Disable this alarm when you are not controlling a chemical injection.
You can enable or disable the Bin alarm for granular applications when using a bin level
sensor. Disable this alarm when you do not have a bin level sensor present or you are
not applying a granular application.
Decimal Shift
You can use the Decimal Shift feature to increase the system accuracy at low applica-
tion rates. In the standard mode, Viper displays values to one decimal place. In the
Decimal Shift mode, Viper displays values to two decimal places.
Important: After you have either enabled or disabled the
Decimal Shift, you must check all calibration settings to make
sure that they are correct and change the settings if
necessary.