Specifications

Manual # 016-0159-894 Rev H 01/07

2-Setting Up the

Controller Area

10. The new speed cal will be automatically calculated.

11. Press the OK and the new speed cal will be used.

Note: Press Cancel to use the existing speed cal.

12. Rerun the test distance and verify the speed cal.

AccuBoom Node

If your CAN system has an AccuBoom node, this setting option will display. There are

two different types of CAN AccuBoom nodes, a standard AccuBoom node and a combo

node that also includes the Boom/Speed node. Select the type of node used on your

system.

Audible Alarms

You can set an audible alarm that produces a five second alarm tone whenever a CAN

alarm trips. This function is only available for Viper systems using hardware that is Rev

C or later.