Specifications

Manual # 016-0159-894 Rev H 01/07

323

A P P E N D I X

CONTROLLING SPINNER RPM

For spinner box machines, you can use a CAN control node capable of controlling

spinner speed.

Valve Type

Select the Valve Type for the machine you are using.

Application

Select Spinner, for the application type. If Spinner does not show up on the applica-

tion rate, you may not have a CAN control node capable of controlling spinner

applications. Check the CAN control node and install a node that is capable of

spinner control.

Meter Cal

The machine should be configured with a magnetic pickup coil mounted near the bolt

heads on the spinner. Calculate the meter cal by multiplying the number of pulses

(bolt heads) per revolution by 10.

For example:

N = Number of bolt heads on spinner

Meter Cal = N x 10

N = 4

Then

Meter Cal = 4 x 10 = 40

Spreader Constant

The spreader constant should be set to 0.

Rate Cal

The Rate Cal should be set to the desired RPM of the spinner.