Specifications

Viper Installation and Operators Manual 2.08
292
Rx Map Issues
Coverage Map Issues
Issue Possible Cause Solution
Prescription map
Map has too Use fewer polygons or points on the prescription
takes a long time
many polygons map. The total number of polygons on a
to load
or points prescription map should not exceed 1000
polygons or 4000 points.
Only one
You have a Purchase a multi-product registration from your
prescription map
single product distributor.
loads
registration
The prescription
Wrong datum Use WGS-84 decimal degrees when creating an
map does not
type Rx map.
display properly
Prescription maps
Map has too Use fewer polygons or points on the prescription
respond too slowly
many polygons map. The total number of polygons on a
or points prescription map should not exceed 1000
polygons or 4000 points.
Issue Possible Cause Solution
Gaps displayed in
Boom widths Check boom widths and boom center values.
coverage map
not set correctly
Guidance and Set guidance width and boom width to the same
boom width not value.
the same
Product coverage
Vibration chatter Make sure that the encoder is firmly mounted.
displayed in zero
in encoder Increase value in "Zero Rate Tolerance".
rate zones
Valve or motor Adjust valve or motor to close or stop completely
is not set to close with no rate applied.
completely
Cannot achieve
Driving too fast Speed may exceed capabilities of vehicle to
target rate
for vehicle deliver product. Slow down the vehicle or
configure the vehicle to supply a higher amount
of product.
Calibration Check and adjust meter calibration, density, and
numbers other calibration numbers.
incorrect
Speed Check and adjust speed calibration setting.
calibration
incorrect