Specifications

Manual # 016-0159-894 Rev H 01/07
281
11 - Rbin Viewer
Export Settings
The Export Settings feature allows you to modify how the Rbin report is displayed.
Two setting options are available.
 Show Zero-Rate
 Filter Overlap
Show Zero Rate - When the ‘Show Zero Rate’ option is unchecked, the Rbin
report will show only those areas that have product applied to them. If the ‘Show
Zero Rate’ option is checked, any area that is driven over will be shown whether
product was applied or not.
Filter Overlap - When making sharp turns with a sprayer, portions of the boom
may actually swing backward over preapplied areas. This will result in small areas
of the field being shown as being covered twice in the shapefiles and in the total
acreage calculation. When ‘Filter Overlap’ is unchecked, areas may show overlap
due to sharp turns and the acreage may be calculated slightly greater than the actual
field acreage. With ‘Filter Overlap’ checked, areas covered twice due to sharp
turns will be filtered out and the acreage calculated will be closer to the actual
acreage of the field.
To Change The Export Settings:
1. Open the Rbin Viewer.
2. Select a file to be viewed.
3. Select Options from the Rbin drop down menu.
4. Select Export Settings. The following screen displays.