Specifications

Viper Installation and Operators Manual 2.08
260
Helpful Hint: If you have a serial console connected to the
Viper, the Console Comm Port screen displays. Press Next
to display the Auxiliary Comm Port screen.
3. Set the Auxiliary Comm Port settings to:
 Baud = 9600
 Data Bits = 8
 Parity = None
 Stop Bits = 2
4. Select the Serial Rate radio button.
5. Press OK to return to the main Viper screen.
Connecting the GreenSeeker® RT200 to Viper
1. Connect the GreenSeeker® Interface Module to PDA Cable to the
GreenSeeker® RT200.
2. Connect the DB9 connector on the GreenSeeker® Interface Module to
the Auxiliary Comm Port connector on the Viper harness.
Starting A Job With External Rate Control
Important: External Serial Rate control is only available for
Product #1. Make sure your system is configured to apply the
desired product from the first product.
1. Select Menu, then Start Job.
2. Select New Job.
3. Using the screen keyboard, enter a name for the job in the Job Name field.
If no name is entered, the date and time are used for the job name.
4. Select the desired options from the list.
5. Press Next. If AccuBoom has been selected from the options list, select
AccuBoom option desired and press Next.
6. If Swath Guidance has been selected from the option list, select the desired
Swath Guidance pattern and press Next.
7. In the Product Selection screen, enter the number of products you are
applying.
8. Press Next. The Product #1 Setup screen displays.